Procedure for Adjusting Working Width (Right Side of Saw)

1. Release the Guiding Plate
Pull up the tightening handle C.

2. Set the Width
According to the material width, turn the handwheel D to position the guiding fence on the left side.

3. Place the Wood Material
Position the face A on the side of the guiding plate B.

4. Lock the guiding plate
Pull down the tightening handle C and start the ripping work.

5. Release the Guiding Plate
Pull up the tightening handle C.

6. Set the Width
According to the material width, turn the handwheel D to position the guiding fence on the right side.

7. Place the Wood Material
Position the surface that has just been sawn (Face A) on the side of the guiding plate B.

8. Lock the Guiding Plate
Pull down the tightening handle C and start the ripping work.