Standard Control Panel on FasTrack

1. Spindle Shaft
Press the green Start or red Stop button to start or stop the shaft motor.

2. Chain Conveyor
Press the green Start or red Stop button to start or stop the feed motor.

3. Inverter Control
Turn the knob left or right to decrease or increase the feeding speed.

4. Spindle Elevation
Press the black Up or Down button to raise or lower the saw arbor.

5. Emergency Stop
Press the Emergency Stop button to stop the main shaft motor and the feed motor. After pushing, rotate the knob to release the stop condition.

6. Amperage Indicator
The gauge indicates the electric power load of the machine.

Standard Control Panel on shortCut & X Blade

1. Spindle Shaft
Press the green Start button to start the shaft motor.

2. Chain Conveyor
Press the green Start or red Stop button to start or stop the feed motor.

3. Emergency Stop
Press the Emergency Stop button to stop the main shaft motor and the feed motor. After pushing, rotate the knob to release the stop condition.

4. Amperage Indicator
The gauge indicates the electric power load of the machine.

Optional Control Panel on on shortCut & X Blade

1. Spindle Shaft
Press the green Start or red Stop button to start or stop the shaft motor.

2. Chain Conveyor
Press the green Start or red Stop button to start or stop the feed motor.

3. Inverter Control
Turn the knob left or right to decrease or increase the feeding speed.

4. Roller Elevation
Press the yellow Up or Down button to raise or lower the top pressure rollers.

5. Emergency Stop
Press the Emergency Stop button to stop the main shaft motor and the feed motor. After pushing, rotate the knob to release the stop condition.

6. Amperage Indicator
The gauge indicates the electric power load of the machine.

7. Lift Protection
Push the Lift Protection button together with the Up or Down button to unlock the roller elevation.