Procedure for Using the Rotary Laser Bracket on FasTrack

1. Release Laser Stand
Use the attached Allen key to unlock the screws on each side of the laser stand.

2. Rotate Bracket
Carefully rotate the laser bracket with two hands to direct the laser beam towards its dedicated saw blade.

3. Laser Beam Alignment
Move the laser stand left or right in order to align it with saw blade.



To align it correctly, the laser beam must appear on the edge of the dedicated saw blade.



4. Lock Laser Stand
After aligning the laser beam with its corresponding saw blade, use the attached Allen key to fasten the screws on each side of the laser stand.

5. Back in Position
Carefully rotate the laser bracket with two hands to direct the laser beam towards the wood piece.